FREE ESTIMATES! (716) 608-3663

driveway sealing buffalo ny

Home » Concrete Buffalo NY » driveway sealing buffalo ny

A concrete driveway is always exposed to an increased risk of abrasion due to the constant running of hot tires and even the harmful heat from the sun especially during the summer. The concrete driveway should be maintained at all times so that these problems can be abated and the performance of the road increases. Sealing your concrete and driveway reduces dust and makes cleaning and sweeping easier. Protects the concrete and Driveway from damage and stains. Also the same sealers can be used on concrete walks and driveways or as a polyurethane floor paints. You should take care when and where you apply a sealer because they cannot be applied over paint or other coatings.

In order to seal concrete and driveway yourself you need several materials and tools: protective clothing, viagra 60mg neoprene rubber gloves, remedy goggles, a stiff brush and a bucket, a paintbrush, a cartridge-style respirator with organic-vapor and small- particle filters, paint roller with extension handle and tray, medium nap roller cover, a concrete degreaser and of course some concrete sealer. Usually a gallon of sealer is used for approximately 100 square feet.

Sealing your driveway right after it is laid you will first need to make sure that the concrete is cured. You must wait twenty one to thirty days after the concrete is poured before you can apply any type of penetrating sealer to the concrete surface. It is important to make sure that the driveway is free from any loose debris like leaves, dirt, mud or stones. After his you should rinse thoroughly with clear water. Many concrete and driveway sealers contain hazardous chemicals that may be harmful to skin and eyes and the vapors are not safe to breathe but the vast majority are acrylic.

The best way to avoid damages to your skin, eyes and lungs is to wear the protective equipment made of neoprene rubber gloves, goggles and a respirator with both organic-vapor and solid-particle filter cartridges. During the process of sealing the floor you should continuously ventilate the garage by opening all doors and windows and also using a fan would be a great idea.

After cleaning and drying the concrete, the sealer has to be applied. The sealer should be tested in an inconspicuous area before applying. Some uneven density in the concrete and driveway may result in light/dark appearance that may be objectionable. By using the medium-nap paint roller with extension handle is the easiest way to apply the sealer. Start in a rear corner continuing to work your way out of the driveway. Before doing anything else you should allow the sealer to dry as indicated on the sealer bottle, usually for a few hours. For a driveway the procedure is essentially the same but it would be quicker to use a garden sprayer to apply the sealer to a large concrete driveway. You should act with caution not to over spray on other material due to the high risk of staining.

Stamped Concrete Buffalo NY